The KXZ-450C cartoning machine is an intelligent packing machine with a packaging speed of 80 cartons per minute. The machine can be applied to package preservative film, aluminum foil rolls, napkins, and other consumer goods. It is suitable for packages of 100-450mm in length, 20-80mm in width and 20-90mm in height while special sizes can be customized.
The machine consists of a sensor, photoelectric and mechanical overload protection system and other devices to form a complete monitoring, alarm, fault display system. It is able to stop conveying cartons when there are no items loaded and stop spraying glue when there is no carton available. It will sound an alarm when the carton does not reach the right position, and shut down the machine when it is overloaded to ensure safe operation.
The whole machine is controlled by the PLC man-machine interface. It utilizes the photoelectric switch to monitor feeding (fresh-keeping film, aluminum foil roll) on the conveyor belt. If the material feed is empty, it will not suck cartons and cancel spraying glue, preventing packaging waste. The automatic waiting function can make it match the production capacity of the rewinder and other equipment. This equipment can be connected with multiple rewinders to form a whole production line. The length of the packaging machine depends on the size of the carton.
Loading units. It can feed materials automatically and stably in order.
Carton store is where the cartons are stored. It can be adjusted for different sizes or lengthened according to customer's demand. It can save time and improve the packaging efficiency.
Suction cup can open the carton precisely and quickly. The suction cup can suck the carton down to the bottom suction cup and then arrange them. The whole suction structure is controlled by a crank to adjust time distribution as required.
Material pusher unit. It can push the materials firmly and package items stably.
Inner flap closing station, inner flaps can seal the carton firmly after items being packed.
Hot melt glue device, it can seal the carton and send the finished product out.
Output device, it can pack the finished products, and the packing is square and good-looking.
Japanese Omron touch screen is very stable and able to count the finished items, display problems, make alarms and shut down the machine.
|Packing speed||30-80 cartons/min|
|Size of package||L(100-450)mm×W(20-80)mm×H(20-90)mm (special size can be customed)|
|Cardboard requirements for packages||250-450 g/㎡ (according to size of carton)|
|Power supply||380V 50HZ|
|Minimum Air pressure||0.6Mpa|
Main parts list
|Item||Name||Model and specification||Origin||QTY|
|2.||PLC Extended Module||CPIE-C1F11||1|
|5.||Photoelectric Sensor||SICK 121||SICK||4|
|6.||Motor||CH-1500-10S 1.5KW||Taiwan CPG||1|
|9.||Emergency Stop||ZB2 BC4D||1|
|14.||Proximity switch||TL-Q5MC1||Japan Omron||2|
|17.||AC contactor||LC1E3210M5N||France Schneider||1|
|18.||Switching power supply||PMC-24V 050V||DELTA||1|
|19.||Air switch||3P32A 1P10A||France Schneider||Each1|
|21.||Cover||Stainless Steel||Shanghai||1 SET|
Hemp rope is all right while iron chain and wire rope should not be used. All the overhanging parts of the machine should be strapped by the rope, and the machine's surface must be protected by elastic items such as rubber or sponge. Solid board is needed to seal the whole machine firmly.